Vehicle Barriers

DSC501

Very High Security Shallow Foundation Barricades. The DSC501 hydraulic Barricade system consists of a wedge barrier ramp operated by a hydraulic power unit via hydraulic cylinders. Single or multiple barricades may be operated by a single hydraulic power unit to yield pass through rates of 3 to 15 seconds per inspection and identification station specifications. The DSC501 has been certified by the US Department of Defense and US Department of State at the K12. Crash testing shows this system to be fully operational after successfully stopping a vehicle weighing 15,000lb\ 67kn at 50mph\80kph.

TT207SFM

High Security Surface Mounted Barricade System. The TT207SFM is a Crash rated moving ramp barricade in which the barricades are lowered in order for passage of authorized vehicles. The system is available for dimensions of up to 240 inches wide and 39 inches high with shallow foundation or bolt to surface options. The TT207SFM is designed for installation at problematic sites including but not limited to parking (stricture) ramps and locations with subsurface draining issues. This system is utilized for the highest security applications.

TT207S

High Security Barricade. The TT207S Hydraulic Barricade System Consists of a 108-inch wedge that is 38 inches high with a diameter of up to 240 inch. This K-12 crash rated system the barricade are lowered in order for the passage of authorized vehicles. The TT207S is utilizes system for first line of defense at sites including but not limited to embassies and other facilities throughout the world.

TT205

High Security Barricade. The crash rated TT205 hydraulic barricade system has been used at government and military applications. It is a 96-inch moving wedge, 24 inches high with a diameter of up to 240 inches, which is lowered in order for authorized vehicles to pass.

TW4030

High security Surface mounted Barricade. The TW4030 is a dual buttress barricade made up of a heavy steel plate which rotates from guard position to (free pass) position by a hydraulic power unit. This surface mounted barricade is 21 inches high, 12 feet wide standard a 20feet maximum width.

TT107SFM

High Security Surface Mounted Barricade. The TT107SFM is a crash rated 144 inch standard moving ramp with a height of 18 inches and available diameter of up to 240 inches. This system is ideal for high security situations and intended for installation at challenging locations including areas with subsurface drainage issues or parking ramps. Shallow foundation and bolt to surface versions are available.

TW2015

Security Surface Mounted Barricades. The TW2015 Hydraulic Barricade System is a 120 inch moving ramp one-inch thick steel plate that's 18 inches high. This crash rated wedge barrier has the capacity to disable a speeding vehicle when necessary. The barricades are simply lowered in order for passage of authorized vehicles. The TW2015 is designed for installation at problematic sites including but not limited to parking structure ramps and locations with subsurface draining issues. No excavation or cutting is necessary on most concrete surface if the requisite strength and dimensional standards are met.

IP500

Drop Arm Barrier. The IP500 Drop Arm barrier is a portable drop-arm beam barrier which can be quickly and Easley installed with hydraulic or manual versions. It can be filled with sand, cement or gravel once in place. This system can be installed on concrete and asphalt roadways. The barrier's height is 34 inches with a raising and lowering capability in 12 seconds. The IP500 secures throughway with 8 to 15 feet width or a clear opening of 120 to 180 inches and has the demonstrated capability to stop and disable a 1500lb (6800kg) vehicle at 30mph (48kph) in under 20feet (6 meters). It's crash test rated at K4 certification level by the US Department of State.

DSC1100

Provides security against vehicle-based terrorism or thefts for high-cycle locations such as the entrances to large office facilities, government agencies and military bases. Able to be deployed in high traffic locations for full manual or automatic operation within two hours, Delta Scientific's quick deployment modular Series DSC1100 Barricade features a phalanx-type rising plate wedge barrier mounted within multiple inertial pods. The plate barrier lies level to the ground to allow vehicles to pass and is raised or lowered into position utilizing a hydraulic cylinder driven by a Delta Hydraulic Power Unit or manually operated. The weight of the Plate Barrier is balanced by a Hydraulic-pneumatic balance system (U.S. Patent # 5,560,733 dated 10/1/96). The Hydraulic Pumping Unit can be sized to provide pass-through rates suitable for most inspection and identification station requirements. The unfilled pods weigh less than 700 pounds (318 kg) and consist of a permanent steel housing back-filled with local concrete either in situ or remotely. Each Pod has fork-lift slots for moving and positioning. Pods can be moved using a small forklift, pallet jack, crane or handcart. They can be set on paved roads and driveways, undisturbed soil or any combination. No excavation or foundation is required. The portable system can be operated using any Delta hydraulic, pneumatic or manual system including fully automatic access or remote control by hardwire or RF links. Certified by: U.S. Department of State Certification Level: K8/L1 & K4/L2, Gross Vehicle Weight: 15,000 pounds/66.7 kN, Crash Speed: 40 mph/64kph

DSC900

Portable Plate Barricade. The DSC900 Portable Plate barricade system features a phalanx type rising plate barrier mounted within multiple inertial pods. The manually or hydraulically powered wedge barrier is positioned level with the ground. The DSC900 is designed for full automatic, remote hard line, remote radio, card reader, key switch, battery powered H4050 pump or local guard push button station operating modes.

TT212

Cable Beam Barricade. The TT 212 Cable Beam Barricade is a low maintenance system with the capability to be integrated with currently security systems. It is available in hydraulic and manual version. Both versions are crash rated.

MP5000

Portable Crash Wedge Barrier. The MP5000 is a portable high security anti-terrorist vehicle crash wedge barrier. Once towed this quickly installed wedge barrier into position. A battery operated hydraulic power system lowers and raises the ramp. The system is a push-button controlled from the wedge barrier. Barrier height is 30 inches with a stander clear opening. The MP5000 received a crash test certification level of K4 by the US Department of State for its ability to stop and disable a 1500lb GVW vehicle at 30mph. The cycle takes 10-15 seconds and rates of 40 cycles per hour.

Inverted Curbed VSB F10

The VSB F10™ is a hydraulically operated, compact, low-profile, high energy absorbing vehicle security barrier. The physical "footprint" is relatively small and, when installed in high traffic locations, the low profile provides a solid, unobtrusive driving surface. No vehicle barrier on the market today provides more stopping power than the VSB F10™.

• All steel construction, welded and inspected to AWS D1.1
• 2" thick, one-piece steel plate wedge
• Wedge height is 39" - higher than others for added vehicle capture
• Twenty-seven 4" wide solid steel load bearing hinges
• 2" diameter load bearing hinge pin fabricated from high strength steel
• Seven 2" thick solid steel load bearing struts arranged in a progressive energy absorbing system
• Forty 1 1/2" diameter high strength anchor bolts
• 144" wide x 96" long footprint
• Weight - approximately 12,500 pounds
• Minimum excavation
• Hydraulic and electrical systems are highest quality and reliability

Horizontal Beam Barrier H-30

The Horizontal Beam Barrier™ (HBB) is an attractive, visible electronically operated steel beam barrier for controlling or barring vehicular traffic. The beam is lowered to surface level to permit traffic flow or raised and secured at 34 inches to stop traffic. The HBB can be operated remotely from a central security monitoring station with optional CCTV or can be controlled from a manned check point. For unmanned control, options include any standard access control system. A hand crank is offered as an option to allow the barrier gate to be raised manually in the event of a prolonged power interruption or for manually operated units. At locations where the ability to deny access is important, the HBB provides security features not available in other barriers. The HBB was designed to stop a 15,000 lb. vehicle traveling at 50 mph, and has an operating mechanism designed to prevent heavy damage to the system when impacted. A crash rating certification will be provided.

FEATURES:

• Minimal installation expense
• Minimal site excavation required
• Durability - the HBB is capable of supporting a vehicular load of 50,000 lbs. per axle weight without deformation or damage to the unit
• All components are industrial, heavy-duty, and the electrical components are of heavy-duty materials
• Low maintenance - the unit is designed for long-lasting wear with minimal repair and parts replacement
• Accessibility of system components - simplified con-figuration permits easy field maintenance, repair or modification if necessary.
• Detailed installation structural, and electrical drawings specific to each customer product

Crop Arm Gate

The Drop Arm Gate is a robust and highly effective improvement on the traditional drop arm gate design. All the important features of the traditional design have been retained and upgraded to DOS crash standards.

It functions like the typical drop arm gate but because of its heavy duty construction and use of high quality parts it provides the ultimate in drop arm gate protection. The Drop Arm Gate can be custom designed to provide the desired length and crash rating. Constructed of galvanized steel they are available in a variety of finishes including powder coating. The unique fully vertical position (90° up) to allow for unobstructed use of the roadway and safe positioning of the arm. This design includes a device for positively locking the arm in the down position. It also features a totally passive mechanical safety latching mechanism that engages on vehicle impact. If manually operated the counterweights can be adjusted to require minimal force for raising and lowering. Powered models are driven by a highly reliable hydraulic operator.

Super Slide Gate

This gate is custom designed to provide the ultimate protection from vehicular intrusion while aesthetically enhancing its surroundings. Its incredible stopping power comes from tubular steel crash beams. The gate posts are 10" by 10" steel stanchions set 5' deep in concrete. An ornamental gate may be mounted on the crash gate to match adjacent fences or structures. This gate is designed to withstand the impact of a 15,000 lb. vehicle traveling at 50 mph (DOS K12 crash rating). A crash rating certification will be provided. Early versions of this gate are currently in use by the U.S. government and in the MiddleEast.

Super Swinging Gate

This gate is custom designed to provide the ultimate protection from vehicular intrusion while aesthetically enhancing their surroundings. Its incredible stopping power comes from tubular steel crash beams. The gate posts are 10" by 10" steel stanchions set 5' deep in concrete. An ornamental gate may be mounted on the crash gate to match adjacent fences or structures. This gate is designed to withstand the impact of a 15,000 lb. vehicle traveling at 50 mph (DOS K12 crash rating). A crash rating certification will be provided. Early versions of this gate are currently in use by the U.S. government and in the MiddleEast.

Attachable SecurGate™ Double Crash Beam

The "Double Beam" Attachable SecurGate™ is a simple, inexpensive counter intrusion system that is attached to new or existing sliding and/or swinging entrance gates to provide crash rated protection.

This gate consists of uniquely designed high strength, dual crash beams that are horizontally attached to the gate, and bollard-type superposts which are set into the ground. This system is designed to set speeds up to 50 mph specific widths and crash ratings up to (DOS K12). A crash rating certification will be provided.

Attachable SecurGate™ Cable Loop Design

The "Cable Loop" Attachable SecurGate™ is a simple, inexpensive counter intrusion system that is attached to new or existing sliding and/or swinging entrance gates to provide crash rated protection.

This gate consist of a uniquely designed light-weight high strength, closed-loop cable system that is horizontally attached to the gate, and bollard-type superposts which are set into the ground. This system is designed to specific widths and crash ratings up to (DOS K12). A crash rating certification will be provided.

Net Fence

The Net Fence™ is an attractive security device for protecting large, open areas by snaring and immobilizing vehicles. This snaring effect is accomplished in a manner similar to that used on aircraft carriers for halting incoming planes.The Net Fence's™ incredible vehicle-stopping capability is achieved by the use of specially designed high strength lateral members (rails) in conjunction with uniquely constructed posts, anchorages, and cables. The system was designed to stop a 15,000 lb. vehicle traveling at 50 mph (DOS K12 crash rating). The result is a physical perimeter security system that appears to be a typical post and rail fence but that is truly an effective vehicle barrier.

Super Post and Cable Fence

The Superpost and Cable Fence is a counter-intrusion system that can be installed in areas to prevent vehicular traffic for security reasons. The Superpost and Cable Fence is an energy absorbing, horizontal barrier system that is capable of snaring a vehicle and preventing entry. It consists of two or more superpost assemblies joined together by two or more cable assemblies. The cable assemblies may be run through the superpost or through eyes attached to the superpost.

OPTIONS:

The Superpost and Cable Fence options include:
• Custom design to fit perimeter setting
• Retrofit to existing perimeter security system
• Various post spacings
• Various post heights
• Various cable heights
• Various cable numbers